#7993
Ward Frahler
Participant

Also I just received some new parts to play with. The rearend is from John’s 9 nine inch factory. I had it shortened 1 1/2″ to 60″ mounting surface to mounting surface where as the original was 61″. Just gives me an opportunity to run a “little ” deeper wheel. I had them send it with the spring perches loose, I want to set up the pinion angle where it as close to correct as possible. I also wanted 31 spline axles. I ordered the Wilwood brakes to go with it. I’ll be running the 12.88″ rotor with 4 piston calipers on the rear and 12.88″ rotor and 6 piston calipers on the front.

Attachments: