Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #8430
    Carl
    Participant

    This is the wife’s car that i’ve been working on and off for a few years now. there was a lot of rust so i picked up a parts car shell to help with the floor pans and rockers. Trunk pan was replaced along with the rear tail panel and cross panel behind it. 20150304_000522.jpg 20150303_155124.jpg 20161002_165228.jpg 20161002_165315.jpg 20161002_230745.jpg

    #8435
    V8 Staff
    Keymaster

    That’s a big job, but it looks like you’ve made some great progress! Who’s restoration panels are you using for the job?

    Thanks for sharing the story, we’ll be following your progress.

    Check out:
    V8 Radio Podcast: https://www.v8radio.com
    V8TV YouTube Channel: https://www.youtube.com/user/V8TV

    #8461
    Carl
    Participant

    Thanks kevin i cant remember off hand who made the pieces but i did notice that they werent as thick as the originals. Just being able to get my hands on a reproduction cross rail was a huge help though :woohoo:

    #8545
    V8 Staff
    Keymaster

    How’s the project coming along?

    Check out:
    V8 Radio Podcast: https://www.v8radio.com
    V8TV YouTube Channel: https://www.youtube.com/user/V8TV

    #8586
    Carl
    Participant

    hi kevin i wont be tackling anymore on this car till the summer haha, right now im helping my dad with his 66 buick lesabre and were just putting it back together

    #8615
    Ward Frahler
    Participant

    Nice work. It is good to know some one even makes those panels. A friend drove 4 hrs one way to buy a rear section for his 79 trans am just to get those same panels. He is wanting me to install them when it warms up a little. Still trying to figure out where we want to separate them, seeing your pics helps a bunch.

    #8616
    Carl
    Participant

    glad the pics helped and good luck on the build

Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.