Mike Clarke

So, I have a bit of a non update, update. I decided to drop by my machinist’s shop just to see what’s up. We chatted a bit and I asked him if my pistons have come in. He had a blank look on his face for a second while he thought about it, then said “Yes!”

We chatted a bit more. Then took a look at these sweet pistons. They looked beautiful. Except they were wrong. ARRRGH! They were supposed to be dished to -18cc. These were at -7cc. For some reason he thought that these were, in fact, correct. He cited the compression height of the piston vs what he calculated. These will sit in the hole a little deeper, effectively reducing compression ratio to a usable level.

He’s going to re-measure the block and verify everything. If it ends up being that the pistons are not correct, he says he has access to a cnc machine to create the necessary dish.

And the wait continues!

Sent from my SM-G900V using Tapatalk