1967 chevrolet camaro pa 2023 08 07

This light blue 1967 Chevrolet Camaro looks great, but the owner wanted it to perform better, so he sent it to the V8 Speed and Resto Shop for some suspension upgrades. He plans on some subframe connectors, coil-over shocks, and downsizing the 17″ wheels to a 15″ Rally wheel for a more period look.

x 3cqn7jvq4.jpg

We recently got our 1967 Chevrolet Camaro SS back from the dustless media blaster to find what type of previous repairs, rust, and corrosion were hiding under the paint.

Getting a car back from a media blaster is exciting because you’re always hoping for the best – meaning that the body or frame will need as little rust and damage repair as possible. There are many questions surrounding the media blasting process. For example:

What is the best blasting media to use for an old car?
What is dustless blasting?
What is glass bead?
What is the best blasting for classic car restoration?
Does sandblasting warp panels?
Is dustless blasting safe?
What can I expect when my car comes back from the media blaster?
What is the best way to strip paint and rust from an old car?
What is the best method to remove paint from a muscle car?

We attempt to answer all these questions in this video where we walk around and take a close-up book at the body shell of this 1967 Camaro after dustless media blasting.

Dustless blasting involves using high-pressure water and glass bead media to remove paint from the surface of the body. It is an excellent way to remove paint from highly contoured surfaces and areas that would take far too long with a traditional sanding tool. Here at the V8 Speed & Resto Shop, we will still manually strip the big flat panels like hoods, roof skins, decklids, door skins and quarter panels, just to minimize any risk of warpage and to have better control over the process. However, the dustless blaster will quickly strip the paint from the fire wall, floors, underside of the car, the trunk floor, door, jams, and all of the little pieces and parts, including the chassis and frame. It is a great way to go.

We’ve restored many Camaros here at the V8 Speed & Resto Shop, and we are looking forward to doing some sheet-metal repair on this car. Plans call for work in the quarter panels, inner wheel houses, trunk floor, dashboard replacement, repairing the outer cowl panels, (or tulip panels), and many more little holes that we found throughout the body shell. We’ll share updates as this 1967 Camaro goes through the fabrication center here at V8 Speed and Resto.

If you have a restoration project like this Camaro, or would like a custom built Hot Rod or classic, you can reach our shop anytime at https://www.v8speedshop.com and we are happy to chat about your project.

Custom Coatings STL / TTT Dustless Blasting

V8 Speed and Resto Shop
817 S. Main Street
Red Bud, IL 62278
https://www.v8speedshop.com/contact
314.783.8325

#v8speedshop #restoration #camaro

SUBSCRIBE: https://goo.gl/RIkdDS

This bright red 1967 Chevrolet Camaro is seeking additional power and road holding performance, and that’s exactly what it’s going ot get at the V8 Speed and Resto Shop! Power will come from a modern LS engine, and the “road holding” performance will be courtesy of a Roadster Shop Spec Chassis. It’s going to retain the classic look with a whole new personality!

This 1967 Chevrolet Camaro restomod is getting the whole Pro Touring treatment as we restore the body and install a GM LSA 6.2 Supercharged V8 backed by a Tremec T56 Magnum 6-speed transmission at the V8 Speed and Resto Shop. We thought we’d share an update as we build the car in our latest “What are you in for” video series where we share in-process projects from around the shop!

Continue reading “Supercharged LSA Pro Touring 1967 Chevrolet Camaro Restomod Upgrades V8 Speed and Resto Shop”

 

Top Camaros Built at V8 Speed and Resto Shop

We’re big fans of first generation Camaros here at the V8 Speed and Resto Shop. Today we’re taking a look at 5 of our favorite restomod First Gen Camaros built here in our shop, in no particular order.

LOU’S CHANGE 1969 CAMARO
See More:  1969 Chevrolet Camaro Lou’s Change LSA Supercharged Pro-Touring Camaro Build Photo Gallery at V8 Speed & Resto Shop

First up is a 1969 Camaro named Lou’s Change.   The goal for this car was to combine modern Camaro styling and performance with the classic look of the ‘69.  Dan Steinhauser created the rendering, complete with a modern ZL-1 style hood with carbon fiber insert and a 3D printed grille.    

We performed all the metalwork in-house, including fabrication of the custom hood, and installation of all new floors, quarter panels, tail panel, fenders, and more. Lou’s Change rides on a complete Detroit Speed suspension front and rear. Deep tubs were installed to accommodate the Toyo R888 tires wrapped around Forgeline wheels. The engine is a modified supercharged GM LSA  6.2L V8 making approximately 630 HP, backed by a 6-speed manual transmission.   The car was sprayed in Mars Red, with a black ZL1 stripe.  It was a feature car at the SEMA show, the Muscle Car and Corvette Nationals, and in Hemmings Muscle Machines Magazine.

COMP CAMS 1969 CAMARO RS CONVERTIBLE
See More: 1969 Chevrolet Camaro COMP Cams 40th Anniversary Restoration at V8 Speed & Resto Shop

This ‘69 Camaro is owned by one of the best names in performance parts, COMP Cams! When it needed a refresh, we were honored that they sent it to us at the V8 Speed & Resto Shop. Upgrades include a Heidt’s front subframe and tubular suspension and rear 4-link system supporting the Currie rear axle. Power comes from is a Butler-LS built LS 454 making 690 HP, and a TCI 6X 6-speed automatic transmission shifts the gears. The interior features Distinctive Industries Touring II seats, Dakota Digital gauges, and Vintage Air A/C.

ZR9 1969 CAMARO
See More: 1969 Chevrolet Camaro ZR9 800 HP Pro-Touring Camaro Build Photo Gallery

This next Camaro is another ‘69, but it’s an all-new car with nearly 100% aftermarket parts. We utilized a new Camaro shell, added some bigger wheel tubs, subframe connectors, and a complete Detroit Speed suspension system. Power comes from a MAST Motorsports LS7 based 427 topped with an LS9 supercharger making over 800 horsepower with a 6-speed manual transmission. Inside you’ll find a full leather and carbon fiber interior, with speedhut gauges, Vintage Air, and high-end audio in a custom dash. The color is Corvette ZR1 Jetstream blue, which really makes the polished trim and Forgeline wheels stand out.

RELOADED 1968 CAMARO
See More: 1968 Chevrolet Camaro Pro-Touring “Reloaded” Build Gallery and Videos at V8 Speed and Resto Shop

The goal of the Reloaded Camaro was to create a modern version of the dealer supercars from the late 1960s, like the 427 Camaros built by Yenko and Nickey Chevrolet. The original front subframe was modified with a Detroit Speed coilover suspension, while a QUADRALink rear suspension was added for far better traction. While the body was being massaged to perfection, our friends at Fast Times Motorworks assembled a 490 cubic inch roller cam V8. The engine is super clean, with satin colors that compliment the exterior with no messy wires or hoses. The transmission is a TCI 4L80E automatic overdrive.

SILVER LT4 1969 CAMARO
See More: 1969 Chevrolet Camaro Transforms From Big Block to Supercharged LT4 V8 at V8 Speed and Resto Shop

This one came to us with a stock suspension system, and a carbureted big block Chevy engine, but the owner wanted more… of everything. The first time the car was here we installed a whole Detroit Speed suspension system front and rear, and an EFI system on the big block Chevy. Bigger Baer brakes were added, and a new set of Forgeline wheels was custom made for the car. The handling and braking improvements were huge, but after a bit, the owner wanted the smooth power of a supercharged dry-sump LT4 engine, so the car came back to the V8 Speed & Resto Shop for round 2! Stock LT4s are powerful, but this one is making north of 750 HP with upgraded pulleys, valve springs, and injectors. Of course, we also build less radical Camaros, but we’re always looking to push the envelope of performance and creativity. What ideas do you have for your ideal Camaro? Contact us at www.v8speedshop.com today, we’d love to bring those ideas to life!

Contact the V8 Speed & Resto Shop with all your Classic or Muscle Car needs today!

 

817 S. MAIN STREET – RED BUD, IL 62278

Author: Michael Clarke
Content: Awesome examples of first gen F-bodies. I’ve been fortunate enough to see a few of these Camaros up close and the video doesn’t do them justice. They’re that good.

—###—

Author: Plymouth Die-Cast Replicas
Content: It’s great to hear Kevin’s commentary again! He has swallowed the dictionary. Awesome Camaros, guys! I love that blue ZR9. Absolutely wonderful machine.

—###—

Author: Jason Hull
Content: The true heart of muscle cars and hot rodding. These are absolutely stunning examples. The level of craftsmanship and detail is above top shelf. Another well deserved hat tip to that remarkable team !
And for the record 15 minutes is the perfect length video for the octane junkie’s lunch break ! Haha 🍻
🇺🇸💪👍

—###—

Author: William Wright
Content: You guys just do awesome work! I am beyond thrilled, to know my car is in good hands!

—###—

Author: Paul M
Content: Beautiful , I take the red one 😇. I would only want it without the supercharger as the naturally aspirated LS is plenty powerful and reliable for daily use. Great builds regardless

—###—

Author: Primoz Krajcar
Content: Those are some bad ass machines. Can you do a similar list on the Corvettes? Top Corvette builds and then go to top Dodge builds and top Mustang builds. I already envision a series here! 🙂

—###—

Author: Lawrence Atwood
Content: I am fortunate enough to “Drive it like I stole it!!” Thanks for the awesome work V8 Speed Shop Team!

—###—

Author: Gary Keenan
Content: Loose Change is a work of art past n present nicely done!!! Comp convertible is a powerhouse would be fun laying down some pavement black marks!!!

—###—

Author: Heavy Pedal Garage
Content: Pure awesome! Gotta love the F bodies! I’ve got a second gen firebird that I’m restomodding over on my channel. I dream of doing a first gen one of these days. Thanks for sharing such amazing cars in some really cool videos. Motivation and inspiration!

—###—

Author: chisel83
Content: Awesome video guys. Happy holidays from south Australia 🇦🇺

—###—

Author: Justin Opinion
Content: You had me at “Camaros”… but then you had to go and make it an awesome video anyway!

—###—

Author: Johnny Hot rod
Content: Love your work
If I ever hit the lottery you guys can do my 67-LT4 with a 6 speed my dream
And fix all my bad gaps
One can dream…

—###—

Author: Calvin Cooley
Content: As far as ideas go I have many! Lol that’s not to be confused with money!
Here is one for the one with the stack.
A modern Nomad-ish build using a base of one 78 to 87 Malibu wagon and some El Camino doors & glass. Maybe a Monte SS nose.
Cut the B pillars, fab some jambs and …….El Mad!
You get the picture I’m sure.
You’re welcome.

—###—

Author: Calvin Cooley
Content: When the hammer falls so do the jaws.

—###—

Author: Tom Wagner
Content: Tesla eat you heart out

—###—

Author: Bruce H.
Content: “We used an all new body on this one”. Really, aftermarket?

—###—

Author: HEY BERT 1984
Content: Cool 70 imp in the background at :21 what are you folks doing to that. I have a 70 myself that i ls3 swapped

—###—

Author: Turbo Lives In my heart
Content: Agh- I can’t breathe

—###—

Author: Big Sexy Muthashutyomouth
Content: Beautiful vehicles gentlemen! The ZR9 has to be my favorite one of all!!!!

—###—